This guide explains how to connect and configure a Lemon product specifically with the Donner DED-500P. It focuses on the actual zone capability and module-specific connection method rather than generic compatibility claims.
View compatible Lemon products
ℹ Important Compatibility Information
Donner DED-500P: 2-zone operation.
🔌 Connection & Setup
Result: the Lemon 3-zone ride works as a 2-zone ride. Standard operation is bow + edge; where the Lemon ride’s internal zone selector permits it, it can be changed once to bow + bell.
Important: this is a hardware/input limitation, not something that sensitivity or threshold settings can overcome.
⚙ Recommended Settings
Start with the module’s closest manufacturer trigger preset for the selected pad or cymbal. Get the basic trigger working before changing advanced parameters.
- Sensitivity/Gain: increase if quiet hits are missed; reduce if normal hits overload the trigger.
- Threshold: raise slightly if vibration or nearby pads create false triggers; lower if soft playing is missed.
- Retrigger/Mask: increase only enough to suppress unwanted double-triggering.
- Crosstalk: adjust only after confirming the pad is mechanically secure.
🔧 Troubleshooting
- No trigger: check cable type, input assignment and kit/trigger activation.
- Only one zone: check that the input supports multiple zones and that a TRS cable is being used.
- Wrong zone: verify the input mapping and, on two-input rides, the two cable assignments.
- False triggers: lower sensitivity or raise threshold slightly, then review crosstalk.
- Missed hits: increase sensitivity gradually or reduce threshold.
Verification note: This guide follows Lemon’s current module-by-module support database and compatibility information. Firmware and hardware revisions can affect trigger behaviour, so test the finished setup before changing multiple parameters at once.
Share this post: